力矩扳手又叫扭矩扳手、扭矩可調扳手，是扳手的一種。按動力源可分為：電動力矩扳手、氣動力矩扳手、液壓力矩扳手及手動力矩扳手；手動力矩扳手可分為：預置式、定值式、表盤式、數顯式、打滑式、折彎式、以及公斤扳手。當螺釘和螺栓的緊密度關重要的情況下，使用扭矩扳手可以允許操作員施加特定扭矩值。
Torque wrench, also known as torque wrench and torque adjustable wrench, is a kind of wrench. According to the power source, it can be divided into electric torque wrench, pneumatic torque wrench, hydraulic torque wrench and manual torque wrench; The manual torque wrench can be divided into preset type, fixed value type, dial type, digital display type, sliding type, bending type, and kilogram wrench. When the tightness of screws and bolts is critical, the use of a torque wrench allows the operator to apply a specific torque value.

(1)所選用的扭力扳手的開口尺寸必須與螺栓或螺
(1) The opening size of the selected torque wrench must be the same as that of the bolt or bolt
母的尺寸相符合，扳手開口過大易滑脫并損傷螺件的六角，在進口汽車維修中，應注意扳手公英制的選擇;各類扳手的選用原則，一般優先選用套簡扳手，其次為梅花扳手，再次為開口扳手，選活動扳手。
The size of the nut is consistent. The wrench opening is too large to slip off and damage the hexagon of the bolt. In the maintenance of imported vehicles, attention should be paid to the selection of metric and British wrench; The selection principle of all kinds of wrenches is generally to give priority to the simple wrench, followed by the ring wrench, the open wrench, and the adjustable wrench.
(2)為防止扳手損壞和滑脫，應使拉力作用在開口較厚的邊，這一點對受力較大的活動扳手尤其應該注意，以防開口出現“八”字形，損壞螺母和扳手。
(2) In order to prevent the wrench from being damaged and slipping, the pull force should be applied to the thicker side of the opening, which should be paid special attention to the adjustable wrench with large stress, so as to prevent the "eight" shape of the opening from damaging the nut and wrench.
(3)扭力扳手是按人手的力量來設計的，遇到較緊的螺紋件時，不能用錘擊打扳手;除套筒扳手外，其它扳手都不能套裝加力桿。
(3) The torque wrench is designed according to the strength of human hands. When encountering tight threaded parts, it is not allowed to hit the wrench with a hammer; Except for socket wrenches, other wrenches can not be equipped with an extension rod.
(4)扭力扳手使用時，當聽到“啪”的一聲時，此時是更合適的。
(4) When using the torque wrench, when you hear a "snap", this is the most appropriate time.
以上就是為大家介紹的有關扭剪螺栓專用扳手詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://m.hkystar.com
The above is a detailed introduction to the special wrench for torsion and shear bolts. I hope it can help you. If you have any questions, please contact us. We will provide you with service with our attitude http://m.hkystar.com